ABB RDNA-01 Instrukcja Użytkownika Pobierz pdf (Strona 288)

288 ACS550-01/U1 User’s Manual

Technical data

Effective motor cable shields

The general rule for cable shield effectiveness is: the better and tighter the cable’s

shield, the lower the radiated emission level. The following figure shows an example

of an effective construction (for example Ölflex-Servo-FD 780 CP, Lappkabel or

MCCMK, NK Cables).

EN 61800-3 compliant motor cables

The most efficient EMC filtering can be achieved by following these rules:

• Motor cables must have an effective shield as described in section Effective

motor cable shields on page 288.

• Motor cable shield wires must be twisted together into a bundle (pig-tail) – the

bundle length must be less than five times its width – and connected to the

terminal marked (at the bottom right-hand corner of the drive).

• At the motor end, the motor cable shield must be earthed 360 degrees with an

EMC cable gland, or the shield wires must be twisted together into a bundle (pig-

tail) not longer than five times its width and connected to the PE terminal of the

motor.

• See section Motor cable length for 400 V drives, columns “EMC limits” on page

284 to check the maximum motor cable lengths and the need for filters for 400 V

drives for IEC/EN 61800-3 compliance.

WARNING! Do not use RFI/EMC filters on IT systems.

Insulation jacket

Braided metallic shield

Inner insulator

1 2 ... 283 284 285 286 287 288 289 290 291 292 293 ... 319 320

Brak uwag

Modelos	Tipo de documento
ne 4250.10p	Manual de usuario Ashly ne 4250.10p User Manual, 16 paginas
ne4250.10pe	Manual de usuario Ashly ne4250.10pe User Manual, 2 paginas

ABB RDNA-01 Instrukcja Użytkownika Strona 288